Toggle menu
2014281720

In Store Service

 

Eminent Paintball & Airsoft
In-store Service

CO2 & HPA REFILL SERVICE

That's Right! We both HPA and Co2!

Paintball/Airgun HPA Fills: 

3000 PSI - $5

4500 PSI - $5

Scuba Tank For Paintball: $10

Co2:

9 - 12 oz - $2.5

16 - 24 oz - $5

5lb - $20

HYDROSTATIC TESTING

We offer a 3rd Party "Hydro" testing. Turn-around time is about a week

Cost which includes testing and shipping to 3rd party: $40

Bulk Discounts Available!

MARKER REPAIR

Eminent is proud to offer a full stuff of certified technicians trained by Manufactures.

Because we fix everything "IN HOUSE" we get you back in the game faster than ever!

We offer both Walk-in / Mail-in RMA Service

Blow-back Gun Service:

$20 bench fee + parts and o-rings

A blow-back gun is your typical Spyder or Tippmann, and their respective clones. We will open the gun up. Clean the internals, replace dynamic o-rings (Dynamic o-rings are the o-rings that see movement) regardless of whether they APPEAR to be good or not. We will inspect all vital components. Once the work is completed, we will reassemble the gun and test for full functionality. If you want the gun chronographed there is an additional fee of $2.00. See Chrono and Gun Tune options below.

Electropneumatic Service:

$25 Bench fee + parts and o-rings

An Electropneumatic gun is one using a pneumatic solenoid and control board to operate the gun. Examples of these would be Dye, Proto, Dangerous Power, Smart Parts, Planet Eclipse etc. We will open the gun up. Clean the internals, replace dynamic o-rings (Dynamic o-rings are the o-rings that see movement) regardless of whether they APPEAR to be good or not. We will inspect all vital components, and recommend replacement only when and where needed. Once the work is completed, we will properly lube the gun, reassemble the gun, properly set regulators, and test for full functionality. See Chrono and Gun Tune options below.

Autococker Gun Service: 

$30 Bench fee + parts and o-rings

An Autococker is a gun with a forward mounted ram, LPR and 3 way valve. Examples of these would be WGP and its many other clones. We will open the gun up. Clean the internals, replace dynamic o-rings (Dynamic o-rings are the o-rings that see movement) regardless of whether they APPEAR to be good or not. We will inspect all vital components, and recommend replacement only when and where needed. Once the work is completed, we will reassemble the gun, properly set regulators, properly lube the gun, time the gun, and test for full functionality. Chronograph is INCLUDED with a cocker service. See Gun Tune options below.

Chronograph Fee: 

$5

We will Chrono your gun before sending it back to you. We will set all guns to 280 fps +/- 5 fps average. We will NOT set a gun higher. Chrono is done using our barrels with Paint-balls. So it may be different with your barrel and paint combination. 

Gun Tune:

$5 to $15 

For electronically controlled guns, we will set up your board to the optimal settings for an additional $5 on top of your service fee. A gun tune is $15 by itself. Be sure to let us know your preferred Mode of Fire and Rate of Fire when you request this service. 

Dirty Gun Service:

 $10

If your gun is gunked up with crappy imitation paint like that found at Walmart or other big box stores, we will charge an additional $10 fee to remove it. This stuff is horrible and is very hard to clean out. So please either clean it prior to sending it to us or feel free pay us to do the extra work!

HOPPER REPAIR

The tech staff of EMINENT.PB has been trained by the manufacturers to repair electronic feeders/hoppers. Eminent maintains "on hand" warranty parts to repair electronic feeder systems.

HOPPER SERVICE/CLEANING 

$10

We will go through the hopper to ensure all components are working properly.

TANK REPAIR 

EMINENT's staff has been trained and certified to repair all brands of high-pressure air systems.
Working with High Pressure can be very dangerous and the tech staff of EMINENT has been safety trained repair all air systems... 

Tank Regulator Service: 

$15 + parts and o-rings

We will diagnose and disassemble regulator. Replace dynamic o-rings, re-lube, re-assemble, and test.

HYDROTESTING

 

Tank Hydro: 

$40
 
 Pass or fail the work has to be completed regardless. We rarely see tanks fail however. We will Hydro your HPA tank. We say that it is a 7 business day turn around time on our end, although they often get done quicker than that. We will properly remove the regulator and re-install install it after the hydro test is completed. We will also fill with air and test for leaks. If it is found that a regulator service is required we will contact you before completing the work. Regulator service is in addition to the hydro test service. We must empty the tank prior to shipping it back per DOT regulations. Depending on the regulator design, minor tool marks may be present from where we had to remove the regulator. No functional damage will be created. We do nothing with the regulators other than remove and re-install during the hydro test process, so if the regulator is found to be in need of repair after doing the hydro test it is because it came to us that way. This is not negotiable. TANKS ARE TESTING WITHIN ONE WEEK!!!  DROP THEM OFF BY CLOSING TIME TUESDAY GET IT BACK FRIDAY!!
 

LAST BUT NOT LEAST

Please Do Not Send
Barrels (unless you have some unusual barrel thread or type check with us prior to shipping if unsure).
Hopper unless it is being serviced
Tank unless it is being serviced
We just need the item being serviced.
If you think anything else is needed please check with us prior to shippingFAQ
Lubes - We use only the proper lubes for the gun. These are: Marker Oil (Gold Cup), Dow 33, and Dow 55. We will not use any other lubricants unless recommended by the manufacturer. You wouldn't believe how many gun problems I have see be due to the use of some cutely named inferior lubricant. Ship time - We typically ship USPS ground. We are based in Kearny, New Jersey. Many points are one and two day ship times. West Coast points are usually 4 and 5 day ships. Expedited ship methods are available upon request.  
Cost of parts - The cost of parts is determined before they are installed. The customer will always be contacted should the item being repaired require more than $10 in parts. Our parts prices are very fair but are determined based on whether they have to be special ordered or in stock. We will get your approval prior to ordering and installing parts totaling over $10.
Cost of o-rings - O-rings are typically 25 cents each. Some special o-rings can cost more. Again if the parts total were to ever reach over $10 we will contact you for approval.